One of our Windows 7 is located in our SAN VLAN and doesn't need to access The internet so that it doesn't setup default gateway. I have enabled remote desktop, but can't access it from other computer in the same subnet using RDP. I found the firewall disabled remote desktop on Public location (note: remote desktop is enabled in the private network). I must enable the remote desktop in the public location to be able to access it remotely. That is OK. My question are:1. Why the LAN display "Unidentified Network"? It is because it doesn't have default gateway?2. Do you know a way to change the "Unidentified Network" network location from the Public to Private? It doesn't give you the option to make the change when it is "Unidentified Network".thank you.Bob Lin, MS-MVP Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Setup Windows, Network, VPN & Remote Access on http://www.howtonetworking.com

Hi, The "Unidentified Network" issue can be caused if the computer cannot obtain invalid IP address. You can configure the gateway to default and check the result. Does the issue persist? If so, please let me know. Otherwise, we can consider that the issue is caused by the current gateway and you should set it to default one. When the "Unidentified Network" message disappears, the Network Location will be changed automatically. Thanks, Novak

Forgot to mention that the computer is setup static IP address without DHCP. Adding default gateway doesn't make any different. Any other suggestions?Bob Lin, MS-MVP Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Setup Windows, Network, VPN & Remote Access on http://www.howtonetworking.com

You can't change the unidentified network to private because that is prevented by a default security setting. You can change the security setting so that the network is not made public in the first place. Here is what you need to do from a previous discussion on this.To do this on your local server , follow these steps: 1. Start --> run --> MMC --> press enter 2. In MMC console , from menu file select Add/Remove Snap-in 3. Select Group Policy Object editor --> Press Add --> select Local computer --> press OK -->press OK 4. Open Computer configration -->Windows Settings -->Security Settings -->select Network list manager policieson the right Side you will see options for : double click -->Unidentified networks Then you can select the option to consider the Unidentified networks as private and if user can change the location. I hope that is will help you and is clear . --------------------------------------------------------------------------------Hikmat Kanaan Amman-Jordan MCSEBill

Make sure your router firmware is up-to-date. We upgrade all the drivers in our PC for Windows 7 but forget to upgrade the router firmware. I upgraded my router firmware and all those unidentified network problems went away. It is much easier than forcing windows 7 to work with an out-dated router firmware. I wish this forgotten upgrade of the router is promulgated by Microsoft. Consequently many of us wasted a lot of time on this one.